How to Jump Start a Vehicle
Vehicle Jump-Starting procedures as listed below should be
followed carefully:
1.Ensure that vehicle battery and battery for jump-starting have the same declared voltage (say 12V)
2.Turn off all electrical loads,in addition with check vehicles – no part should be touching each other
and gear should be in neutral position because vehicle should not move from the location wherever
you parked.
3.Vehicles should have the same terminal earthed, if not, refer to manufacturers’ instructions. Make
sure that cables are not frayed or damaged.If damaged came to in conclusion that it should be
rectified First after that you Continue your Jump start Process
4.Make sure cables are away from fan blades and other moving vehicle parts.
5.After starting, remove cables in reverse order, starting with one connected
to engine block or car frame.
6.If vehicle does not start within 30 seconds,after that call an auto electrician it may not battery fault.
“When a vehicle battery dies, the most common solution is to jump-start the battery using
jumper cables and another vehicle.for jump-starts at residences.Plus, you might want to
think twice about asking a stranger for help.
2 thoughts on “How to Jump Start a Vehicle”
I have read your article carefully and I agree with you very much. This has provided a great help for my thesis writing, and I will seriously improve it. However, I don’t know much about a certain place. Can you help me?
Do you mind if I quote a couple of your articles as long asI provide credit and sources back to your website?My blog site is in the very same niche as yours and my users would certainly benefit from some of the information you present here.Please let me know if this okay with you. Thanks!